Gas detector alarm wireless

Tk. 1,500


Dhanmondi, Dhaka
New/Used : New
Category: Electronics > Security & Surveillance Systems > > > Gas detector alarm wireless

DESCRIPTION ( Gas detector alarm wireless )

Name:433 mhz Wireless Natural Leak Gas Detector Work with Security  Alarm System  For the Home Security


The product is wall mounted gas detector with high stability.(hereinafter called detector) It is used for detecting leaking gas. Advanced semiconductor sensor is adopted to ensure high stability and long life. It is convenient for mounting.The product is suitable for the safety ofresidential house, villas, hotels, markets, boarding house etc.



Operating Voltage AC100V to 240v
Static Current: less than 90mA
Alarm Current: less100mA
Rating Power: less than 3W
Warm-up Time: about 180S
Alarm Level: 10%LEL
Alarm indicator: red LED flash
Failure Indicator: yellow LED on & beeper long-buzz
Sound Level: more than 85dB/m
Operating Temperature: -10 +50 centi degree
Environment Humidity: less than95% RH (no congelation)
Installation Mode: wall mounted
Alarm Output: relay output/sound & flash alarm
Wireless Radio frequency: 433mhz
Chip Cod Form: EV1527 with 330K resistor

Transmission Distance: About 15 to 40M indoor;100m in open area(no obstacle)    




Installation of gas detector
Installation should be according to gas weight.
a. For natural gas and mash gas etc, which are a bit lighter than air, gas detector should be installed under ceiling 0.3m to 1.2meters and within the rang of 1.5m semidiameter from gas sources.

b. For liquefied petroleum gas (LPG), which is a bit heavier than air and sink down to a lower level, the gas detector should be installed above 0.3—1.2meters from floor and within the range of 1.5m semidiameter from gas sources.

ClickBD - Buy anything and get the best price in Bangladesh