Arcam avp700 pre amp from uk

Arcam avp700,preamplifier,comes from uk,01783607171,
Audiophile quality components for best sound quality, including 1% metal film resistors, polypropylene film capacitors, OSCON electrolytic capacitors & double sided, through-plated fiberglass circuit boardsBalanced & Unbalanced pre amp outputs for all 7 channels and subwooferMulti-channel 7.1 analogue input for DVD-A or SACD sourcesStereo direct switch bypasses and disables all digital processing for 2 channel analogue sources7 stereo analogue inputs (plus tuner); 3 tape outputs (one a tape loop)Zone 2 stereo audio, from stereo analogue inputs or internal tuner. Source and volume control independent from main outputsBuilt in FM/AM RDS stereo tuner with 30 FM and 16 AM presets
Digital audio
State of the art Crystal Semiconductors CS49400 DSP, with 24-bit fixed point double precision Dolby Digital and DTS decoding and 32-bit fixed point double precision bass management. 4 layer PCBsWolfson Microelectronics 24-bit 192kHz DACs, stereo ADC and precision electronic volume controlsDecodes Dolby Digital EX, Dolby Pro Logic IIx (including full music mode support), DTS 96/24, DTS-ES Discrete and Matrix 6.1, DTS Neo 66 Arcam-optimized surround effects modes for 2 channel sourcesAdjustable crossover switching from 40 – 130 Hz in 10 Hz stepsSeparate sub woofer level settings for film and stereo listeningBass and treble equalizers, both global and for each of 7 main channels6 fully assignable digital inputs, 3 co-axial, 3 optical; 1 coaxial & 1 optical outputAssignable global audio delay, adjustable from 0 – 220 milliseconds, to compensate for video processing delays in digital displays or DVD players
Video
2-way HDMI switching, HDCP compatible5 composite and 5 S-video inputs; 3 fully buffered outputs of each type3x HDTV compatible component video inputs and 1 monitor output (these may alternatively be configured to support RGB, with sync on composite video, for use in European TV systemsVideo up conversion – composite to S-video and vice versa via the monitor outputs; composite and S-video to interlaced component videoVideo up conversion to RGB with sync on composite (SCART compatible) for European TV displays. 12V triggers support S-video, RGB and widescreen switching for SCART equipped TVs.