Trans digital TDS meter

The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate. TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing. All readings are temperature compensated to 25ºC, a must for concentrated liquids. The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.

Precision
Precise display of 10 ppm over the scale of 0 to 10,000 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications:
Model: Senz TDS 2
Range: 100 to 10,000 ppm
Resolution: 100ppm
Accuracy: ± 2% full scale
Calibration Points: Single point at 6440ppm
Battery Type: 4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life: Approx. 100 hours
Automatic Shut-off: Approx. 15 minutes
Automatic Temperature Compensation: 0 to 50°C or 32 to 122°F
Operating Temperature: 0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH): 185mm x 65mm x 25mm
Packaging Weight: Approx. 135gm
Product Dimension Size (LxWxH): 170mm x 32mm x 15mm
Product Weight: Approx. 70gm
More Detail Please Call Us
Contact Parson – Mr Soikot
Cell Phone-01777833865,01682173106
Tel:+88-04477960033, Email: [email protected]
Our Address In Bangladesh
Nawabpur Scientific
Muhammadia Super Market, House No-176(3rd floor)Nawabpur Rode,
(Opposite Of Rupali Bank),Dhaka Bangladesh
Best Quality Product supplier in Bangladesh
‘‘বাংলাদেশে শ্রেষ্ঠ মানের পণ্য সরবরাহকারী’’
https://www.facebook.com/Nawabpurbd
http://nscbd.com/